M28*1.5*1.5D Type Threaded Insert 304 Stainless Steel Type 304 Stainless Steel Product

• Customization: Available
• Material: Stainless Steel
• Type: Screw Lock
• Model NO.: M2-M100
• Usage: Building, Machinery, Medical
• Rotation Direction: Standard
• Surface Finishing: Standard
• Certification: ISO, RoHS
• Customized: Customized
• MOQ: 100 PCS
• Thread Accuracy: 6h
• Name: Wire Thread Insert
• Nominal Length: 1d-3D
• Transport Package: Carton Box
• Specification: M4-M16
• Trademark: XYY
• Origin: China
• HS Code: 7318190000
• Production Capacity: 50000pieces
• Package Size: 14.50cm * 8.50cm * 10.50cm
• Package Gross Weight: 0.045kg

Product Description

Product Description

 

Common type wire screw bushing is a mechanical part used to repair or reinforce threaded holes, which is widely used in various industries, such as aerospace, automobile manufacturing, machinery and equipment.
Characteristics of common type wire screw sleeve:
1. Material: usually made of stainless steel material, such as 304 stainless steel, 316 stainless steel, etc., with good corrosion resistance and strength.
2. Simple installation: Compared with the tailless screw sleeve, the common type wire screw sleeve usually needs a tail to guide the installation, and the installation process is relatively simple.
3. Wide range of application: It can be used in a wide range of material substrates, such as aluminum, steel, plastics, etc.
4. Strength Improvement: The strength of the threaded hole can be significantly improved after installation to extend the service life.
5. Repair ability: can be used to repair worn or damaged threaded holes.
The working principle of common type steel wire threaded bushing:
-Common type wire screw sleeve is installed into the threaded hole by special tool. During installation, the tool screws the sleeve into the hole and expands the internal threads of the sleeve so that it fits tightly into the hole wall.
-Once in place, the sleeve can withstand greater loads and provide better threaded joint strength.
Steps for installing a regular type wire mesh sleeve:
1. Prepare the hole: Drill the hole using a suitable drill bit and clean the hole of swarf.
2. Tapping: Tap the hole with a suitable tap to ensure that the threads in the hole are clean and undamaged.
3. Installation of the nut: Use the special tool to install the common type wire nut into the hole until it is completely in place.
4. Check the installation: Make sure that the screw sleeve is installed firmly and correctly.
Application Scenarios of Common Type Wire Sleeve:
-Repair damaged threaded holes: When the threaded holes are worn or damaged, common type wire nuts can be used to repair them.
-Improve the strength of the connection: Use the common type steel wire sleeve where high strength threaded connection is needed to enhance the reliability of the connection.
-Special environment: Use common type wire nuts in high temperature, high pressure or corrosive environment to ensure the stability of the connection.

Product Parameters

 

Category	Size	Internal thread	Outer thread	Length	Drill hole
Heavy	M4	M4*0.7	M8*1.25	8mm	6.9
	M5	M5*0.8	M10*1.25	10mm	8.8
	M6	M6*1	M12*1.25	12mm	10.8
	M8	M8*1.25	M14*1.5	14mm	12.8
	M10	M10*1.5	M16*1.5	16mm	14.75
	M12	M12*1.75	M18*1.5	18mm	16.75
	M14	M14*2	M20*1.5	20mm	18.75
	M16	M16*2	M22*1.5	22mm	20.5

Our Advantages

Characteristics and advantages

It can be used in almost any material, including aluminum, cast iron, steel and plastics Positive rotation prevention of mechanical lock High strength and flexibility provide maximum pull-out strength It is easy to install and disassemble and can be installed with standard electric drill and tap. However, the keensert installation kit is also available if required No prewinder tool required Cannot cross thread during installation No need to disconnect

Certifications

 

Company Profile

Customers at Exhibitions

FAQ

1. who are we?

We are based in Henan, China, start from 2014,sell to Eastern Europe(10.00%),South America(10.00%),North
America(10.00%),Africa(5.00%). There are total about 11-50 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
Wire thread insert,Self tapping insert,Tanglees,Keensert,Thread repair kit

4. why should you buy from us not from other suppliers?
Our company is a professional manufacturer of thread inserts and tools. Xinxiang, a powerful industrial city in Central China,has been engaged in thread nesting industry for more than 20 years.

5. what services can we provide?
Accepted Delivery Terms: FOB,EXW,Express Delivery;
Accepted Payment Currency:USD;
Accepted Payment Type: T/T,L/C,MoneyGram,Western Union;
Language Spoken:English,Chinese